Home > Environmental > Moisture Meter >   Wet Wall Moisture Detector (TRAMEX). (ITM) Each
	Our Price: USD2,185.00 Product Code: TRX2004 Qty:

Description   The location of excess moisture and decay behind an exterior insulation finish (EIF) wall cladding system can be difficult and near impossible, as normally, evidence of this moisture and decay are not visible on either side of the wall. Excess moisture can be hidden and trapped in the substrate and within the thickness of the wall. If these conditions are allowed to continue, the moisture will increase, as will the rot and decay, eventually leading to possible failure of the cladding system and the structure. Also wet insulation loses its thermal value resulting in unnecessary heat loss or gain and thermal movement in the structure. So in the interest of all concerned, early detection of these problems or potential problems and corrective remedial action makes good economic sense. The Wet Wall Detector has been specifically developed for the detection, location and tracking of excess moisture within and behind EIF systems. This electronic instrument will read through fibre reinforced lamina and exterior insulation to locate and evaluate excess moisture that may be present in the sheathing substrate and wood stud. The Wet Wall Detector works on the principle of electronic impedance. With impedance measurement, harmless signals are transmitted from the electrodes at the base of the instrument deep into the thickness of the wall. These signals measure the change in electronic impedance which is translated into a relative moisture content reading and instantly displayed on the large analog dial. Readings are instant and continuous. The Wet Wall Detector is also fitted with and audible device which sounds at high readings. The Wet Wall Detector is non-destructive in operation which means that it can detect excess moisture without the need to mechanically probe, cut or damage the surface. The Wet Wall Detector will give vital information necessary to evaluate and carry out moisture assessment on the condition of most fibre reinforced EIF systems of wall cladding and similar systems at an affordable cost without complications Features: • For non-destructive moisture evaluation of EIF systems • For tracing moisture back to source • Fast and easy to operate • Instant clear readings • Lightweight, handheld, battery-operated ----------------- MOISTURE DETECTOR,Wet Wall Moisture Detector (TRAMEX), tramex moisture meter, lumber meter moisture

Related Products... Concrete Moisture Detector (TRAMEX). (ITM) Each Our Price: USD875.00 Add Introducing three new pin-type wood moisture meters (Delmhorst). (ITM) Each Our Price: USD249.00 Add Datalogging Humidity Temperature Meter. Each Our Price: USD209.00 Add Digital Thermo Hygrometer. Each Our Price: USD129.50 Add Dual Function Moisture Meter (PROTIMETER). Each Our Price: USD1,090.00 Add

 Share your knowledge of this product with other customers... Be the first to write a review.

Browse for more products in the same category as this item: Environmental > Moisture Meter