 |
 |
 |
|
Model TMULD-300 Ultrasonic Leak Detection Kit:
includes leak detector, transmitter, earphones and headphones, and two types of extensions for leak
detection in areas that are tight, dangerous, hot or difficult to access; all supplied in a foam-lined
carrying case. Use to detect leaks in refrigeration and air conditioning systems, heating systems,
steam traps, compressors and compressed air systems, brake systems on trucks, and leaks in tire and tubes.
--------------
Model ULD-300 Ultrasonic Leak Detector:
Conventional leak detection uses a response to a specific gas. An inaccessible or dangerous area or a
light breeze can interfere with successful detection. This Ultrasonic Leak Detector solves these problems. When gas is forced through a small opening - a leak in a pressure or vacuum system - an
ultrasonic sound is created. This sound is very directional, and this directionality is used to locate the source or leak. This handheld unit is extremely easy to use. Just turn it on and point it in the general area of a suspected leak. High visibility LEDs light up to indicate the strength of a leak signal, and the
adjustable sensitivity allows the leak to be pinpointed with great accuracy. The process is fast, accurate and nearly foolproof.
-------------
Model UT-300 Ultrasonic Transmitter:
In areas where leaking gases are at low pressure, there may be no ultrasonic sound to detect. This unit allows an area to be artificially "pressurized" with ultrasound, so small cracks and openings can be detected. Particularly useful for checking air leaks around door and window seals and gaskets, water leaks in roofs, leaks in vacuum vessels, and door, trunk and windshield leaks in cars.
------------
Specifications:
Model ULD-300 Ultrasonic Leak Detector:
Frequency Response: 20 - 100 kHz, ±3 dB
Sensitivity: Capable of detecting a Freon R12 leak
flowing at 8 ml/min under 100 psi
Display: High intensity LEDs
Power Supply: 9V alkaline battery, 50 hr, life approx.
9V carbon battery, 25 hr. life approx.
Power Consumption: 18mA@ 9V, LEDs off; 33mA@ LEDs on
Dimensions (HWD): 1.62" x 2.56" x 7.68" (41.15 x 654 x 195 mm)
Weight: 7.97 oz (226 g) w/battery
Model UT-300 Ultrasonic Transmitter:
Frequency Output: 40 kHz
Display: Power/battery light
Power Supply: 9V alkaline battery, 60 hr. life approx.
Power Consumption: 8.5 mA @ 9V
Dimensions (HWD): 1.62" x 2.56" x 6.02" (41.15 x 65 x 153 mm)
Weight: 5.6 oz (160 g) w/ battery |
|
|
|
|
|
|
|
|
