 |
 |
 |
|
Simply press the START/TEST button and the GasAlertClip Extreme is ready to use, providing two years of continuous, maintenance-free operation from the day of activation.
The GasAlertClip Extreme is highly waterresistant, with an IP-66/67 housing fully immersible to a depth of one meter. The GasAlertClip Extreme housing includes a integral concussion-proof boot, and a heavy-duty, stainless steel, alligator style belt-clip. A large easy-to-read LCD shows detector life remaining, alarm setpoints, and peak alarm exposures.
The detector’s life remaining is displayed in months, days, then hours. A fullfunction self-test verifi es sensor, circuitry and battery integrity as well as function of the audible, visual and vibrator alarms. Stored data can be transmitted directly by IR link to a cordless infrared printer for immediate printout, or to a personal computer by means of an IR adapter connected to the computer’s USB port.
The GasAlertClip Extreme is equipped with two alarm setpoints used to activate a high output 95 dB (typical) audible alarm, a bright, wide-angled quad LED visual alarm and a built-in vibrator alarm.
Simply clip the GasAlertClip Extreme to your lapel, pocket, belt or hard-hat for unequaled, cost-effective protection.
Supported Gases:
* H2S - hydrogen sulfide
* O2 - oxygen
* CO - carbon monoxide
* SO2 - sulfur dioxid
-----------
Features:
Protect Yourself
* Two years of protection with zero maintenance costs
* Continuous, alphanumeric LCD shows detector life remaining, alarm setpoints and advises self-test status
* Rugged, IP-66/67 highly water-resistant design
* Built-in concussion-proof boot
* Records and displays the peak alarm encountered and the time since the exposure occurred
* Records and transmits gas alarm events encountered and the time elapsed since the event occurred
* Two alarm levels (Low / High)
* Provides typical 95 dB tone and bright, quad-LED indication on alarm
* Internal vibrator alarm
* Small size (1.1 x 2.0 x 3.2 in. / 28 x 50 x 81 mm) and lightweight (2.7 oz. / 76 g)
* Maintenance free—no sensor or battery replacement, no calibration, no downtime
* Full function self-test of: audible/visual alarms plus integrity of sensor, battery and circuitry
* Continuously ON—one button activation, test and data transmission
* Comes complete with pocket/belt clip and test cap
* Instructions in local languages included
* Optional alligator and hard hat clips available
-----------
Specs relating to Gas Alert Clip Extreme 24 Month Gas Detector:
Gas monitored: H2S CO SO2 O2
Sensor range: 0 - 100 ppm 0 - 300 ppm 0 - 100 ppm 0 - 30.0% by vol.
Low alarm level: 10 ppm 35 ppm 5 ppm 19.5 %
High alarm level: 15 ppm 200 ppm 10 ppm 23.5 %
Operating Temperature: -40 to +122 °F -40 to +50 °C -22 to+122°F -30 to +50°C
-22 to +122 °F -30 to +50 °C -4 to +122 °F -20 to +50 °C
Calibration: Not required Self-calibrating
GENERAL SPECIFICATIONS Rugged composite material with integral concussion-proof boot
Humidity 5% to 95% RH (non-condensing)
EMI/RFI Complies with EMC Directive 89/336/EEC
Ingress protection IP 66/67
Battery Lithium, non-replaceable
Size 28 x 50 x 81 mm / 1.1 x 2.0 x 3.2 inche
WARRANTY: 2 years from activation plus 1 year shelf-life
Operational life Two years3
Continuously on Yes
One-button control Activation, self-test and alarm event data transmission
Full function self-test Verifies integrity of sensor, circuitry and battery; audible/visual alarms
Sensor Electrochemical cell (temperature compensated)
INDICATORS AND ALARMS:
Visual gas alarm Flashing, wide-angled alarm lens with dual red LEDs plus ALARM LCD readout
Audible gas alarm Pulsing siren 85 dB at 0.3 m / 1 ft.
Vibrator alarm Internal
Failure alarm Yes (audible/visual)
Self-test pass Yes (audible/visual)
Other Low battery and end of life (audible/visual)
CONTINUOUS LCD DISPLAY: Alphanumeric status panel LCD advises
Life remaining Continuously displayed in months, then days, then hours
Two alarm levels LOW alarm / HIGH alarm
Peak alarm exposure Records and displays peak alarm exposure, and time elapsed (up to 24 hrs.)
Alarm setpoints High and low (displayed on demand in ppm or %)
Self-test status Advises to “TEST” and that self-test was passed “.”
TESTS
Full function self-test On-demand, as often as once every 20 hours and on activation
Battery Every two hours (auto)
EVENT LOGGING Records and transmits up to 10 gas alarm events
Event information Gas type, peak exposure level (ppm or %); alarm duration in minutes and seconds; time elapsed since the alarm occurred in days, hours and minutes
Transmission method Via infrared port to thermal printer or USB
|
|
|
|
|
|
|
|
|
