 |
 |
 |
|
The GasAlert100 is a practical, cost-effective solution to short-term work projects. The GasAlert100 provides 100 days of continuous, maintenance-free operation from the day of activation. Operated by an advanced microcontroller and electrochemical sensor, GasAlert100 is equipped with two levels of alarm and a continuous, alphanumeric confidence LCD.
Simply press the START/TEST button and the GasAlert100 is ready for use. The life remaining is displayed in days and then hours. The full function self-test verifies sensor, circuit and battery integrity and audible/visual alarms. Alarm setpoints are displayed on command. The rugged, compact GasAlert100 is designed with the most advanced RFI protection available in industry today.
Simply clip the instrument to your lapel, pocket, belt or hard hat for unequalled protection.
Supported Gases:
* H2S - hydrogen sulfide
* CO - carbon monoxide
---------
Features :
# 100 days of continuous protection
# Continuous, alphanumeric LCD
# Records and displays peak alarm encountered
# Small size--1.0 x 1.45 x 2.3 in. / 26 x 37 x 58 mm
# Light--weighs just 1 oz. / 30 g
# Maintenance free--no sensor or battery replacement, no calibration, no downtime
Self-Tests
# Daily, full function self-test verifies sensor and circuitry integrity
# Battery is tested continuously (auto) and on demand
# Manual self-test on demand
------
Specs :
Model: GasAlert100 H2S GasAlert100 CO
Operational life: 100 days 100 days
Sensor range: 0-100 ppm 0-300 ppm
Low alarm level: 10 ppm 35 ppm
High alarm level: 15 ppm 200 ppm
Operating temperature:-22 to +113 °F +5 to +113 °F
-30 to +45 °C -15 to +45 °C
Calibration: Not required Not required
Continuously on Yes
One-button control Activation and self-test
Full function self-test Verifies sensor, circuitry and battery integrity and audible/visual alarms
Sensor Electrochemical cell (temperature compensated)
INDICATORS AND ALARMS
Visual gas alarm Flashing, wide-angled alarm lens with dual red LEDs plus ALARM LCD readout
Audible gas alarm Pulsing siren 95 dB at 1 ft./0.3 m (typical)
Failure alarm Yes (audible/visual)
Self-test pass Yes (audible/visual)
Other End of life (audible/visual)
CONTINUOUS LCD DISPLAY Alphanumeric status panel LCD advises:
Gas monitored H2S or CO
Life remaining Continuously displayed in days and then hours
Two alarm levels LOW alarm / HIGH alarm
Peak alarm levels Records and displays peak alarm exposure, and time elapsed (up to 24 hrs.)
Alarm setpoints High and low (displayed on demand in ppm)
Self-test status Advises to “TEST” and that self-test was passed “.”
TESTS
Full function self-test On demand, as often as once every 20 hours and on activation
Battery Every two hours (auto)
GENERAL SPECIFICATIONS Impact-resistant ABS enclosure
Ingress Protection IP65
Humidity 5% to 95% RH (non-condensing)
EMI/RFI Complies with EMC Directive 89/336/EEC
Battery Lithium, non-replaceable
Size 1.0 x 1.45 x 2.3 inches / 26 x 37 x 58 mm
WARRANTY 100 days from activation plus 1 year shelf life |
|
|
|
|
|
|
|
|
