 |
 |
 |
|
Leather Protector Gloves should always be worn over Rubber Insulating Gloves to provide the needed mechanical protection against cuts, abrasions and punctures. All Salisbury protectors are steamed pressed on curved hand forms to insure proper fit over Rubber Gloves. Manufactured from top grade leather, all are sewn with heavy duty nylon thread in the “gunn cut” inseam construction pattern. Protectors are dual sized. Single sized marked protectors are available by special order. Each protector, Class 1-4, is equipped with a nonmetallic buckle on the pull strap and an extra wide leather reinforcement over the thumb seam. Protectors for Class 0, 00 are available with non-metallic buckle and pull strap or elastic wrist.
It is the responsibility of the purchaser to specify the overall length of the protector gloves. The Clearance Table shows the minimum distance which shall be allowed between the top of the protector glove cuff and the top end of the bead of the rubber glove per ASTM F496 Specifications. Your company work rules should be followed in case of a discrepancy.
WARNING: Do not use leather protectors alone for protection against electric shock. Serious injury or death will result. Always use proper rubber insulating gloves. Proper care of leather protectors is essential to user safety. Inspect the leather protectors when inspecting rubber gloves. Metal particles, imbedded wire, abrasive materials or any substance that could physically damage the rubber gloves must be removed from the protector before use.
low voltage electrical gloves, electrical gloves safety, electrical gloves rubber, electrical gloves insulated, Low Voltage Gloves safety, Salisbury gloves, Salisbury low voltage gloves, Salisbury electrical flash gear, Voltage Gloves protection, Voltage Gloves gloves, gloves, Hand protection, electrical safety, electrical gloves safety, low voltage electrical safety, electrical safety tool, construction electrical safety, electrical safety supply, device electrical safety, electrical laboratory safety, construction electrical product |
|
|
|
|
|
|
|
|
