 |
 |
 |
|
For HRC 2 Rating
The NFPA 70E Standard and OSHA Regulations have been established to protect workers from electrical shock and arc flash hazards and to educate workers about the protection needed from these dangers.
For example, the NFPA 70E Standard specifies areas within which arc flash protection is required for work-ers involved in the maintenance of energized or po-tentially energized electrical equipment. All person-nel within the defined boundaries must wear speci-fied protective equipment, even on circuits as low as 50 volts.
The NFPA 70E Standard and OSHA Regulations MUST be met
These kits contain the following
Arc Flash Coat
Arc Flash Bib Overalls
PRO-HOOD™,
Hard Hat
SKBAG
Safety Glasses
Dielectric Boots(optional below)
This Kit meets NFPA 70E-2004 Hazard Risk Category 2
Arc Flash Potective Kit, arc flash safety supply, arc flash protective gear, flame resistant clothing, flame resistant jacket, construction clothing, construction safety, Flame resistant Switching Two Layer Flash Jacket, construction supply, construction supplies, flash coverall, flash coveralls, safety coverall, safety coveralls, safety cloting, safety wear, Flame resistant Flash Coverall, Flame resistant Coverall, indura safety coverall, indura safety coveralls, indura safety clothing, indura coverall, industrial safety coveralls, industra indura safety wear, Flame resistant Flash clothing, coveralls, construction clothing, construction safety, construction supplies, construction supply, Flame resistant Flash Coverall, electrical safety, electrical safety clothing, industrial electrical safety, electrical label safety, workplace electrical safety |
|
|
|
|
|
|
|
|
