 |
 |
 |
|
Replaced with 9002X Click here
An X-tra large viewing area, combined with five user-adjustable dark shades for stick, MIG and TIG welding. For low amp TIG and other welding conditions, the welder can select from three dark shades: 9, 10 and 11.
The Speedglas 9000X has a big 4.09" x 2.13" viewing area, with clear, sharp optics and consistent shading across the entire viewing area.
A solar panel on the front of the lens cassette helps to power the unit, extending battery life to approximately 3000 hours.
Auto-Off: turns off lens 30 minutes after last arc.
Immediate-Off: simply hold the ON/OFF button down for two seconds.
5 Dark Shades: 5 dark shades (gold numbers) for stick, MIG and TIG; plus 3 dark shades (red numbers) for low-amp TIG and other welding conditions.
Sensitivity Adjustment: provides additional adaptability, under a variety of lighting conditions, when in the red ("low-amp TIG") numbers.
Shade 3 Light State: for outstanding visibility.
Solar Panel: maximizes battery life.
Speedglas 9000X Specifications
Light Shade: 3
Dark Shades: user-adjustable to 9, 10, 11, 12 and 13.
Off (Fail-Safe) Shade: nominal 5
Viewing Area: 4.09" x 2.13" (104mm x 54mm)
Weight, Helmet with Lens: 17.39oz (493g)
Battery Life (Average): 3000 hours
Operating Temperature: 23° to 131°F (-5 to 55°C)
Standards/Approvals: ANSI Z87.1/CSA Z94.3
OPTIONAL SIDE WINDOWS: SideWindows(tm) Lenses Improve Visibility, Safety & Comfort Now welders can have peripheral vision with Speedglas SideWindows helmets. The two shade 5 side lenses increase the viewing area by over 100%
SideWindows(tm) lenses allow welders to see potentially-hazardous peripheral objects, such as protruding beams, vehicles, and other welders. The peripheral vision lenses permit welders to more easily move around their work area while being constantly protected from harmful emissions and arc flashes. The side lenses are positioned exclusively for peripheral vision; welders view the arc through the center, auto-darkening lens.
Eliminate "tunnel vision"...try out a Speedglas SideWindows helmet and see what you're missing!
SideWindows Specifications
Lens Materials: Impact resistant polycarbonate
Lens Shade: 5
Note: Very strong sunlight and light from very close, side-by-side welding may interfere with the welder's view of the workpiece; when practical, use welding partitions to separate welders.
Standards/Approvals for SideWindows helmet and lenses: ANSI Z87.1/CSA Z94.3 |
|
|
|
|
|
|
|
|
